Eu-Konformitätserklärung; General Notes; Intended Use - Kärcher SP 17.000 Flat Level Sensor Bedienungsanleitung

EU-Konformitätserklärung
Hiermit erklären wir, dass die nachfolgend bezeichnete
Maschine aufgrund ihrer Konzipierung und Bauart so-
wie in der von uns in Verkehr gebrachten Ausführung
den einschlägigen grundlegenden Sicherheits- und Ge-
sundheitsanforderungen der EU-Richtlinien entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Ma-
schine verliert diese Erklärung ihre Gültigkeit.
Produkt: Pumpe
Typ: 1.645-xxx
Einschlägige EU-Richtlinien
2014/35/EU
2014/30/EU
2011/65/EU
2009/125/EG
Angewandte Verordnung(en)
(EU) 2019/1781
Angewandte harmonisierte Normen
EN 60335-1
EN 60335-2-41
EN 62233: 2008
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN IEC 63000: 2018
Die Unterzeichnenden handeln im Auftrag und mit Voll-
macht des Vorstands.
Dokumentationsbevollmächtigter:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2021/06/01

General notes......................................................

Intended use .......................................................

Hazard levels ......................................................
Environmental protection ....................................
Accessories and spare parts...............................
Scope of delivery.................................................
Warranty..............................................................
Device description...............................................
Initial startup........................................................
Operation ............................................................
Care and maintenance........................................
Transport .............................................................
Storage................................................................
Troubleshooting guide.........................................
Technical data .....................................................
Optimising the flow rate.......................................
Declaration of Conformity....................................
Read these original operating instruc-
tions and the enclosed safety instruc-
tions before using the device for the first
time. Proceed accordingly.
Keep both books for future reference or for future own-
ers.
Only use the device in private households.
Intended use:
● Removal of water from building sections in the event
of flooding
● Transferring and pumping water from containers
● Water removal from wells and shafts
● Pumping fresh water out of boats and yachts
For notes on functional principle, see chapter Opera-
tion.
Permissible feed fluids
DANGER
Danger of death and risk of damage when pumping
explosive, flammable or unsuitable substances!
Flammable or explosive substances may ignite or ex-
plode.
Unsuitable substances can damage the pump.
Do not pump explosive, flammable or corrosive liquids
or gases (e.g. fuels, petroleum, nitro thinner) and do not
pump fats, oils, salt water or waste water from sanitary
facilities or water that has a lower flowing ability than
clean water.
Permissible feed fluids:
● Fresh water up to a certain degree of soiling
SP 17000 Flat Level Sensor:
Water with a degree of soiling up to grain size 5 mm
SP 22000 Dirt Level Sensor:
Water with a degree of soiling up to grain size
30 mm
● Swimming pool water with intended dosage of addi-
tives
● Washing lye, e.g. from leaking washing machines.
Then rinse and clean the pump with clear fresh wa-
ter, see chapter Rinsing and cleaning.
● The temperature of the pumped liquids must lie be-
tween 5 °C and 35 °C.
English
Contents
General notes
Intended use
9
9
10
10
10
10
10
10
10
11
12
12
12
12
13
13
13
9