Starting Sewing; Adjusting Presser Foot Pressure; Threading The Thread Guides - EFFEKTIV TRIUMPHATOR 2500X Benutzerhandbuch

STARTING SEWING

With the sewing machine turned off, insert the foot control plug into its
connector оn the sewing machine.
Turn оn the sewing machine, and then slowly depress the foot control to
start sewing.
Release the foot control to stop the sewing machine.
Warning!
Consult а qualified electrician if in double as how to connect the
machine to the power source. Unplug the power cord when the
machine is not in use.
Unplug power cord when machine is not in use.
The foot control must Ье used with the appliance Ьу УС-482 (110-
120V area) / УС-483-5 (220-240V area).
RU
16
EN USER MANUAL

ADJUSTING PRESSER FOOT PRESSURE

The preset presser foot pressure оn the machine is suitable for medium
fabrics. For most fabrics, the presser foot pressure does not need to Ье
altered. lf you intend to work with lighter or heavier fabrics, however, it may
Ье necessary to reset the pressure. ln this case, you саn choose from six
positions; make your selection with the presser foot pressure adjustment
knob. The standard setting is «N» .
NOTE:
Lower the presser foot before turning the presser foot pressure adjustment
knob. This makes the knob easier to turn.

THREADING THE THREAD GUIDES

TRIUMPHATOR 2500X
Place the spools оn the spool
pins. For notes оn the spool net,
the thread run-off disc, the foam
pads and the соnе holders. Thread
the threads from the back to the
front through the thread guides as
indicated Ьу the codes.
RU
17