Preparing To Sew; Тelescopic Thread Guide / Cone Holders / Thread Net / Spool Сар - EFFEKTIV TRIUMPHATOR 2500X Benutzerhandbuch

PREPARING TO SEW

RU
10
EN
Looper Cover
Push the looper cover fully
to the right and then swivel it
down.
Waste Bin
lnsert the upper latch of the
waste bin into the upper slot
of the looper cover. Apply
pressure to the lower part of
the bin until the lower latches
fick into place in the lower
slots of the looper cover.
То remove the waste bin,
repeat this procedure in the
reverse order.
USER MANUAL
ТELESCOPIC THREAD GUIDE / CONE HOLDERS /
THREAD NET / SPOOL САР
Telescopic Thread Guide
Pull the telescopic thread guide upwards to its highest position.
То ensure optimum thread feed, turn the telescopic parts slowly until you
hear the locking balls fick into place.
Foam Pads/ Cone Holders
lf you are using large cones (5,000 -10,000 mm), the foam pads and the
cone holders will bе helpful to you.
With synthetic threads, the foam pads catch threads that have slipped
down and help to advance the thread flawlessly.
Cone holders serve to ensure that large cones are well positioned.
TRIUMPHATOR 2500X
RU
11