Restricting Kvm-Over-Ip Remote Stations (Uid Locking) - G&D ControlCenter-IP-XS Installationsanleitung

5. Select the Multicast video
system:
on:
off:
6. Press F2 to save your settings.
IMPORTANT:
The selected setting is only applied when a new connection is estab-
lished. Existing connections are retained unchanged.
Restricting KVM-over-IP remote stations
(UID locking)
By default, each computer module and each user module is allowed to establish a
KVM-over-IP connection to the IP matrix switch.
ADVICE: Activate the function
modules or user modules should be able to connect to the IP matrix switch.
How to enable/disable UID locking:
1. Start the web application of the
2. In the directory tree, click on
3. Double-click the IP matrix switch.
4. Click on the tab KVM connection
Basic configuration of the KVM-over-IP™ connection
entry and press F8
Apply system-wide setting (see above).
This target module ( IP-CPU
cast to other user modules (
This option allows users with »Target multi access« right to
connect to this computer, even if another user is already con-
nected.
This target module (
cast to other user modules (
It is not possible to connect a user to this computer if another
user is already connected (message:
UID locking
IP matrix switch
KVM matrix system > [Name] > Matrix switches
.
to select one of the following options:
) sends the video stream via multi-
).
IP-CON
IP-CPU ) sends the video stream via uni-
IP-CON ).
No multicast video
if you want to specify which computer
.
G&D ControlCenter-IP-XS · 19
).
.