Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Basic configuration of the KVM-over-IP™ connection
4. Select the
Multicast video
on:
off:
5. Press
to save your settings.
F2
IMPORTANT:
The selected setting is only applied when a new connection is estab-
lished. Existing connections are retained unchanged.
How to configure the individual multicast or unicast video transmission settings
of a target module:
1. Press the
Ctrl+Num
2. Press
F11
to call the
3. Select the
Target
4. Select the target module you want to configure and press
ADVICE:
Use the menu's search function, the view filter or the sort criteria to limit the
selection of list entries.
18 · G&D ControlCenter-IP-XS
entry and press
By default, the target modules (
via multicast to the user modules (
This option (standard) allows users with »Target multi access«
right to connect to a computer to which another user is
already connected.
The target modules (
to the user modules (
The connection of a user to a computer to which another
user is already connected is not possible in this mode (mes-
sage:
No multicast video
(default) hotkey to open the on-screen display.
Configuration
menu.
entry and press
Enter
to select one of the following options:
F8
IP-CPU
IP-CON
IP-CPU
) send the video stream via unicast
) by default.
IP-CON
)!
.
) send the video stream
).
F5
.
Werbung
Inhaltsverzeichnis
