Installation
The following pages describe the installation of the devices of the IP matrix switch.
NOTE:
When choosing a place for the device, please ensure to comply with the
ambient temperature limit (see Technical data on page 22) close to the device. The
ambient temperature limit must not be influenced by other devices.
Power supply
Power:
Connect an external power supply to this interface.
Network interfaces
Network:
Plug a category 5e (or better) twisted pair cable, which is available as acces-
sory, into this interface. Connect the other end of the Gigabit Ethernet.
Service
Service
Network
Network
Service
Service
Network
12VDC
Power
12VDC
12VDC
Power
Power
G&D ControlCenter-IP-XS · 9
Installation