Unpair An End Device - G&D ControlCenter-IP-XS Installationsanleitung

Basic configuration of the KVM-over-IP™ connection
5. Click on
Add end devices
The table shows you the following information about the devices found:
Name:
IP transmission:
IP management:
MAC transmission:
MAC management:
UID:
Status:
6. Activate the
Add
switch.
ADVICE:
To add all allowed devices to the IP matrix switch at the same time,
select the check box in the column header of the
NOTE:
You can also click
device to be added or the IP address range of several devices to be added.
7. Click on .
Save

Unpair an end device

How to unpair an end device:
1. Start the computer's web browser and enter the URL in the address line.
https://[IP address of the device]
2. Enter the following data in the login mask:
Username:
Password:
3. Click on .
Login
16 · G&D ControlCenter-IP-XS
on the context menu.
List of end devices, which can be added
to the IP matrix switch.
IP address of the transmission interface
IP address of the management interface
MAC address of the transmission interface
MAC address of the management interface
physical ID of the device
Display whether the device is
matrix switch or already
slider in the row of each device you want to add to the IP matrix
Add manually
Enter a username.
Enter a password for your user account.
available
occupied .
column.
Add
to manually enter the host name of a
for adding to this