Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Initial configuration of the network settings
Resetting the netfilter rules
In the default settings, all network computers can access the system's IP address
(open system access).
With the
Config Panel
access to the matrix system. After a netfilter rule has been created, the open system
access is deactivated and all incoming data packets are compared to the netfilter
rules.
The created netfilter rules can also be deleted with this function.
How to delete the created netfilter rules:
1. Press the
Ctrl
+
Num
2. Press
F11
to call the Configuration menu.
3. Select the
System
4. Select the
Reset netfilter configuration
5. Select
Yes
and press
14 · G&D ControlCenter-IP-XS
web application, you can create netfilter rules to control the
(default) hotkey to open the on-screen display.
entry and press
Enter
entry and press
Enter
to respond to the prompt for confirmation.
.
Enter
.
Werbung
Inhaltsverzeichnis
