Basic Configuration Of The Kvm-Over-Ip™ Connection; Adding End Devices - G&D ControlCenter-IP-XS Installationsanleitung

Basic configuration of the KVM-over-
IP™ connection
This section explains the settings required for start-up the IP matrix switch.
NOTE: All settings of the KVM-over-IP™ connection are described in detail in the
documentation of the web application of the IP matrix switch.

Adding end devices

Compatible devices of the
for and added by the IP matrix switch.
The KVM-over-IP™ connection of the end device is automatically configured by
the IP matrix switch and is then immediately ready for operation.
NOTE:
Alternatively, you can set up the initial KVM-over-IP™ connection of each
end device manually, as described in the chapter Establishing a KVM-over-IP™ con-
nection for the first time of the end device manuals.
How to add (more) end devices:
1. Start the computer's web browser and enter the URL in the address line.
https://[IP address of the device]
2. Enter the following data in the login mask:
Username:
Password:
3. Click on Login .
4. In the menu, click on
Basic configuration of the KVM-over-IP™ connection
Vision-IP and VisionXS-IP
Enter a username.
Enter a password for your user account.
Matrix systems > [Name] > Matrix
series can be automatically searched
.
G&D ControlCenter-IP-XS · 15