Technical Data - IKEA FRAMTID FC323/78 Bedienungsanleitung

ENGLISH
Problem
The temperature in the
appliance is too low/
high.
If your appliance is still not working proper-
ly after making the above checks, contact
the After Sales Centre. You can find the list
at the end of this manual.
Replacing the lamp
Caution! Disconnect the plug from the
mains socket.
1. Remove the
screw from
the lamp
cover.
2. Pull out-
wards the
rear hook of
the lamp
cover by us-
ing a screw-
driver and remove the lamp cover pull-
ing downwards.

Technical data

Dimensions
Height
Width
Depth
Net Volume
Fridge
Freezer
Defrost System
Fridge
Freezer
All manuals and user guides at all-guides.com
Possible cause
The temperature regulator is
not set correctly.
1800 mm
695 mm
661 mm
323 Litre
78 Litre
auto
auto
Solution
Set a higher/lower tempera-
ture.
3. Replace the lamp with one of the same
power and specifically designed for
household appliances. (the maximum
power is shown on the lamp cover).
4. Install the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains socket.
7. Open the door. Make sure that the light
comes on.
Closing the door
1. Clean the door gaskets.
2. If necessary, replace the defective door
gaskets. Contact the After Sales Service.
Star Rating
Rising Time
Freezing Capacity
Energy Consumption
Noise Level
Energy Class
The technical infor-
mation are situated
in the rating plate on
the internal left side
of the appliance and
in the energy label.
13
20 hours
4 kg/24h
0,951 kWh/24h
44 dB (A)
A+