RADEMACHER RP-S1-650N-1 Einbau- Und Bedienungsanleitung Seite 50

Set control button of hand transmitter
NOTE
The actuation of the door is preset by the supplier to
correspond to the second button of the hand transmitter.
„0" means that no button has been selected.
1. Press „+" (if necessary
press several times) until
„5" is displayed
4. Press button „P" in
order to store the
setting.
50
2. Press „P",
„2" flashes
(2 = factory setting)
5. Conclude programming
(refer to page 53, method 2)
or
proceed to next setting.
3. Press „+" or „-" to select
the required channel.
0 = no button
1 = button 1
2 = button 2
GB