MSI RG54SE II Handbuch Seite 63

connected to your cable/DSL modem during installation. If your ISP requires
MAC register, login to the router and click the "Network" menu link on the left of
your browser, and then click "MAC Clone" submenu link. On the "MAC Clone"
page, if your PC's MAC address is proper MAC address, click the "Clone MAC
Address" button and your PC's MAC address will fill in the "WAN MAC Address"
field. Or else, type the MAC Address into the "WAN MAC Address" field. The
format for the MAC Address is XX-XX-XX-XX-XX-XX. Then click the "Save"
button. It will take effect after rebooting.
3. I want to use Netmeeting, what do I need to do?
1) If you start Netmeeting as a sponsor, you don't need to do anything with the
router.
2) If you start as a responsor, you need configure Virtual Server or DMZ Host.
3) How to configure Virtual Server: Login to the router, click the "Forwarding" menu
on the left of your browser, and click "Virtual Servers" submenu. On the "Virtual
Server" page, click Add New, then on the "Add or Modify a Virtual Server" page,
enter "1720" into the blank behind the "Service Port", and your IP address
behind the IP Address, assuming 192.168.1.169 for an example, remember to
"Enable" and "Save".
Note: Your opposite side should call your WAN IP, which is displayed on the
"Status" page.
RG54SE II
Figure A-3 MAC Clone
Figure A-4 Virtual Servers
A-5 Add or Modify a Virtual server Entry
- 57 -
54M Wireless Router User Guide