Backup And Restore; Reboot - MSI RG54SE II Handbuch

•
The default Subnet Mask: 255.255.255.0
Note: Any settings you have saved will be lost when the default settings are restored.

5.11.4 Backup and Restore

This page (shown in figure 5-51) allows you to save current configuration of router as
backup or restore the configuration file you saved before.
Figure 5-51 Backup & Restore Configuration
Click the Backup button to save all configuration settings as a backup file in your
local computer.
To restore the router's configuration, follow these instructions:
•
click the Browse button to select the backup file which you want to restore.
•
Click the Restore button.
Note: The current configuration will be covered with the uploading configuration file. The
restoration process lasts for 20 seconds and the router will restart automatically. Keep
the router on during the restoring process, to prevent any damage.

5.11.5 Reboot

This page (shown in figure 5-52) allows you to reboot the router.
Click the Reboot button to reboot the router.
Some settings of the router will take effect only after rebooting, which include:
•
Change LAN IP Address. (System will reboot automatically)
•
MAC Clone (system will reboot automatically)
•
DHCP service function.
•
Static address assignment of DHCP server.
•
Web Service Port of the router.
•
Upgrade the firmware of the router (system will reboot automatically).
•
Restore the router's settings to factory default (system will reboot
automatically).
RG54SE II 54M Wireless Router User Guide
Figure 5-52 Reboot the router
- 53 -