MSI RG54SE II Handbuch Seite 30

the background.
Connect Automatically - Connect automatically after the router is disconnected. To
use this option, click the radio button.
Connect Manually - You can configure the router to make it connect or disconnect
manually. After a specified period of inactivity (Max Idle Time), the router will
disconnect from your Internet connection, and you will not be able to re-establish
your connection automatically as soon as you attempt to access the Internet again.
To use this option, click the radio button. If you want your Internet connection to
remain active at all times, enter "0" in the Max Idle Time field. Otherwise, enter the
number in minutes that you wish to have the Internet connecting last unless a new
link is requested.
Caution: Sometimes the connection cannot be disconnected although you specify a
time to Max Idle Time, since some applications is visiting the Internet continually in
the background.
8. If you choose PPTP, you should enter the following parameters (figure 5-12):
User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
Dynamic IP/ Static IP – Choose either as you are given by your ISP and enter the
ISP's IP address or the domain name.
If you choose static IP and enter the domain name, you should also enter the DNS
assigned by your ISP. And click the Save button.
RG54SE II 54M Wireless Router User Guide
Figure 5-12 PPTP Settings
- 24 -