MSI RG54SE II Handbuch Seite 23

RG54SE II 54M Wireless Router User Guide
Figure 5-5 WAN - Static IP
You should type the following parameters into the spaces provided:
IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your
ISP, usually is 255.255.255.0.
Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal
notation provided by your ISP.
MTU Size - The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1500 Bytes. For some ISPs you may need to modify the MTU.
But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
Primary DNS - (Optional) Enter the DNS address in dotted-decimal notation
provided by your ISP.
Secondary DNS - (Optional) Type another DNS address in dotted-decimal notation
provided by your ISP if provided.
3. If you choose PPPoE, you should enter the following parameters (figure 5-6):
Figure 5-6 WAN - PPPoE
User Name/Password - Enter the User Name and Password provided by your ISP.
- 17 -