MSI RG54SE II Handbuch Seite 61

including total traffic and traffic of the last Packets Statistic interval seconds.
Current Statistics Status - Enable or Disable. The default value is disabled. To
enable, click the Enable button. If disabled, the function of DoS protection in
Security settings will be ineffective.
Packets Statistics Interval - The default value is 10. Select a value between 5 and
60 seconds in the pull-down list. The Packets Statistic interval indicates the time
section of the packets statistic.
Sorted Rules - Select sorted rule of statistics results as your desired.
Statistics Table:
IP Address
Packets
Total
Bytes
Packets
Bytes
Current
ICMP Tx
UDP Tx
TCP
SYN Tx
Click the Save button to save the Packets Statistic interval value.
Click the Auto-refresh checkbox to refresh automatically.
Click the Refresh button to refresh immediately.
RG54SE II
Figure 5-55 Statistics
The IP Address displayed with statistics
The total amount of packets received and transmitted by the router.
The total amount of bytes received and transmitted by the router.
The total amount of packets received and transmitted in the last Packets
Statistic interval seconds.
The total amount of bytes received and transmitted in the last Packets
Statistic interval seconds.
The total amount of the ICMP packets transmitted to WAN in the last
Packets Statistic interval seconds.
The total amount of the UDP packets transmitted to WAN in the last
Packets Statistic interval seconds.
The total amount of the TCP SYN packets transmitted to WAN in the last
Packets Statistic interval seconds.
- 55 -
54M Wireless Router User Guide