The Front Panel; The Rear Panel - MSI RG54SE II Handbuch

Connecting Internet on demand and disconnecting from the Internet when idle for
PPPoE.
Built-in NAT and DHCP server supporting static IP address distributing.
Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC
address filtering.
Supports connecting/disconnecting from the Internet on a specified time of day.
Supports access control, parents and network administrators can establish
restricted access policies based on time of day for children or staff.
Provides 64/128/152-bit WEP encryption security and wireless LAN ACL (Access
Control List).
Supports Flow Statistics.
Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter.
Ignores Ping packets from WAN or LAN ports.
Supports firmware upgrade.
Supports Web management.2.3 Panel Layout

2.3.1 The Front Panel

The front panel of the RG54SE II consists of several LED indicators, which is designed to
indicate connections. View from left. Table 2-1 describes the LEDs on the front panel of
the router.
Name Action
Not lit
Power
Lit up
Lit up
System Flashing
Not lit
Not lit
Link/Act Lit up
Flashing
Not lit
WLAN
Flashing

2.3.2 The Rear Panel

The rear panel contains the following features. (View from left to right)
RG54SE II 54M Wireless Router User Guide
Figure 2-1 Front Panel sketch
No Power
Power on
The router is initialising
The router is working properly
The router has a hardware error
There is no device linked to the corresponding port
There is a device linked to the corresponding port but no
activity
There is an active device linked to the corresponding port
There is no wireless device linked to the device
The Wireless function is enabled
Table 2-1 The LEDs description
- 4 -
Description