Your PC's MAC Address - This field displays the MAC address of the PC that is
managing the router. If the MAC address is required, you can click the Clone MAC
Address button and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory
default value.
Click the Save button to save your settings.
Note:
1)
Only the PC on your LAN can use the MAC Address Clone feature.
2)
If you click the Save button, the router will prompt you to reboot.
5.5 Wireless
Figure 5-14 Wireless menu
There are three submenus under the Wireless menu (shown in figure 5-14): Wireless
Settings, MAC Filtering and Wireless Statistics. Click any of them, and you will be
able to configure the corresponding function. The detailed explanations for each
submenu are provided below.
5.5.1 Wireless Settings
The basic settings for the wireless network are set on this page, figure 5-15:
RG54SE II
54M Wireless Router User Guide
- 26 -