Dmz; Upnp - MSI RG54SE II Handbuch

3. Incoming Port Range cannot overlap each other.

5.7.3 DMZ

The DMZ host feature allows one local host to be exposed to the Internet for a
special-purpose service such as Internet gaming or videoconferencing. DMZ host
forwards all the ports at the same time. Any PC whose port is being forwarded must have
its DHCP client function disabled and should have a new static IP Address assigned to it
because its IP Address may change when using the DHCP function. You can set up DMZ
host on this page shown in figure 5-29:
To assign a computer or server to be a DMZ server:
1. Click the Enable radio button
2. Enter the local host IP Address in the DMZ Host IP Address field
3. Click the Save button.
Note: After you set the DMZ host, the firewall related to the host will not work.

5.7.4 UPnP

The Universal Plug and Play (UPnP) feature allows the devices, such as Internet
computers, to access the local host resources or devices as needed. UPnP devices can
be automatically discovered by the UPnP service application on the LAN. You can
configure UPnP on this page that shown in figure 5-30:
Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable
or Disable button. As allowing this may present a risk to security, this feature is
disabled by default.
Current UPnP Settings List - This table displays the current UPnP information.
App Description – The description provided by the application in the UPnP
•
request
External Port - External port, which the router opened for the application.
•
RG54SE II 54M Wireless Router User Guide
Figure 5-29 DMZ
Figure 5-30 UPnP Settings
- 39 -