RG54SE II
54M Wireless Router User Guide
Figure 5-7 PPPoE Advanced Settings
Packet MTU - The default MTU size is 1480 bytes, which value is usually fine. For
some ISPs, you need modify the MTU. This should not be done unless you are sure
it is necessary for your ISP.
Service Name/AC Name - The service name and AC (Access Concentrator) name,
these should not be configured unless you are sure it is necessary for your ISP.
ISP Specified IP Address - If you know that your ISP does not automatically
transmit your IP address to the router during login, click "Use the IP Address
specified by ISP" check box and enter the IP Address in dotted-decimal notation,
which your ISP provided.
Detect Online Interval - The default value is 0, you can input the value between 0
and 120. The router will detect Access Concentrator online at every interval between
seconds. If the value is 0, it means, do not detect.
DNS IP address - If you know that your ISP does not automatically transmit DNS
addresses to the router during login, click "Use the following DNS servers"
checkbox and enter the IP address in dotted-decimal notation of your ISP's primary
DNS server. If a secondary DNS server address is available, enter it as well.
Click the Save button to save your settings.
4.
If you choose 802.1X + Dynamic IP, you should enter the follow parameters(figure
5-8) :
- 19 -