Items Supplied; Installation - Vortice PUNTO EVO Betriebsanleitung

ENGLISH

Items supplied

The fan unit is enclosed in a plastic cylinder incorporated in the motor carrier, which can be entirely
accommodated in the destination pipe and whose short length makes it perfectly compatible with installation
near elbow bends (90°), typical of pipe fittings. The main parts of the appliance are:
• Motor carrier and front panel, made of ABS thermoplastic, impact resistant and anti-UV resin;
• Centrifugal rotor made of PP resin, designed for high performance, low power consumption and low noise
emissions;
• Motor with shielded poles, equipped with ball bearings and fitted with a thermal fuse.
• PCB, different depending on the model.

Installation

Figg 2 ÷ 14
N.B.
Whatever the orientation of the appliance, the non-return valve must always be in a vertical position (fig.9, 10)
N.B.
If the non-return valve should come out of place and/or split into its halves, it will be possible to reposition it
as shown in fig 10a, 10b.
51