Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
38
INSTALLING FILTERS
Grease mesh filters
1.
Angle the filter into slots at the back of the hood.
2.
Push the button on handle of the filter.
3.
Release the handle once the filter fits into a resting position.
4.
Repeat to install all filters.
Cabon filters (not supplied)
1.
Before installing or replacing the carbon filters, please remove power to the
unit.
2.
Press the filter lock and remove the mesh filter.
3.
Turn the carbon filter on both side of the motor anti-clockwise. Replace the
carbon filters with the new carbon filters.
4.
Place the mesh filter.
5.
Connect the power supply to the wall socket.
Notes
•
Make sure the filter is securely locked. Otherwise, it would loosen and cause
dangerous.
•
When activated carbon filter attached, the suction power will be lowered.
Werbung
Inhaltsverzeichnis
Fehlerbehebung
