5�2�5 Cable Connection - Baumer HUBNER BERLIN HMG 10 Montage- Und Betriebsanleitung

ELECTRICAL CONNECTION / SPEED SWITCH AND ADDITIONAL OUTPUT INCREMENTAL
5.2.5 Cable connection
)
To ensure the specified protection of the device the correct cable diameter must
be used�
Connecting cables are not in scope of delivery�
Cable shield
MB252EN - 11173969, 16A1, Baumer_HMG10-DeviceNet_II_EN
22
21
22 mm
Mt = 2-3 Nm
TX 20
20
19
19 Terminal box cover
20 Torx and slotted screw,
M4x32 mm
21 Cable gland M20x1�5 mm
for cable ø5-13 mm
22
Connecting terminal,
core cross-section ≤1.5 mm
Connecting cable
ø5-13 mm
Connecting terminal [ B ]
Speed switch/additional output
See section 5.2.6.1
section 5.2.6.2�
or
20/33
2