3�2 Required Accessory For Mounting/Dismounting (Not Included In Scope Of Delivery); 3�3 Required Tools (Not Included In Scope Of Delivery) - Baumer HUBNER BERLIN HMG 10 Montage- Und Betriebsanleitung

3.2 Required accessory for mounting/dismounting (not included in scope of delivery)
i
Connecting cables and respective connectors are required for the electrical connec-
tion� Details see
9
10e 10d
10a
11b 11a
11c
11d
3.3 Required tools (not included in scope of delivery)
3, 5 and 6 mm
1�6x8�0 mm and 0�8x4 mm
10 (2x), 17 and 22 mm
TX 10, TX 20
MB252EN - 11173969, 16A1, Baumer_HMG10-DeviceNet_II_EN
section 5, page
Torque arm, length L / order number
9 Standard version:
67-70 mm / 11043628
125 (±5) mm, can be shortened to ≥71 mm / 11004078
440 (+20/-15) mm, can be shortened to ≥131 mm / 11002915
9 Insulated version:
67-70 mm / 11054917
125 (±5) mm, can be shortened to ≥71 mm / 11072795
440 (+20/-15) mm, can be shortened to ≥131 mm / 11082677
Mounting kit, order number 11077197:
10a Thread rod - M6, length variable ≤210 mm
10b Washer - ISO 7090, B6�4
10b 10c
10c Self-locking nut - ISO 10511, M6
10d Cylinder screw for earthing strap - ISO 1207, M6x8
10e Washer for earthing strap - ISO 7090, B6�4
Mounting/dismounting kit, order number 11077087:
(Not required for version with through hollow shaft)
11a Cylinder screw - ISO 4762, M6x30
11b Spring washer - DIN 7980, 6
11c Setscrew - ISO 7436, M6x10
11d Cylinder screw - ISO 4762, M8x45
13�
PREPARATION
6/33