Maintenance And Care - Morso FORNO Bedienungsanleitung

ASSEMBLY OF MORSØ GRILL FORNO
To avoid injury during unpacking and assembling the oven, we recommended that 2 people should
carry out this work.
The assembly of legs, steel ring with hooks and the lower part of the Grill Forno, you have to be
aware of the location of the 3 hooks for hanging accessories.
The oven may have pale markings on delivery. These are a result of assembly and handling during
production. Marks will probably also arise when you assemble the oven. They can easily be removed
using cooking oil.

MAINTENANCE AND CARE

Morsø Grill Forno is produced in cast iron.
Cast iron parts can be washed with a mild solution of soft soap when the oven is cold. Preferably use
demineralised water, as ordinary tap water can leave limescale.
Due to the heat, the stainless tubes connecting the legs and base of the Grill Forno may in certain
cases suffer corrosion, so that they become brownish/blueish.
The legs on the Grill Forno are supplied untreated, and will in time become grey. If you want to retain
the brown glow of the timber, you will have to treat it with furniture oil. Oak can stay outdoors all
year round, but we recommend storing the grill under a roof in an unheated room for the winter –
for example, in a garage or basement room.
IMPORTANT
Make sure to clean your product before its first use, and make sure that there are no packaging
material left on the product.
Make sure to Heat the product at max temp for at least 15 minutes before using the product for
the first time. If your product has a lid it needs to be pre heated with a closed lid.
If there is a breach in the enamel coating or enamel flakes have fallen off the Grill grate (or cook-
ing area), then the grill grate needs to be replaced.
NOTIFICATION OF DEFECTS
The warranty period runs from the date of purchase, and covers defects and omissions. The duration
according to the national Sale of Goods Act applies.
The warranty does not cover:
• Wear items, i.e. parts that deteriorate during normal use. For these parts, the relevant
provisions of the Sale of Goods Act for deficiencies apply.
• Damage resulting from incorrect installation and use in relation to Morsø's assembly and usage
guidelines.
• Damage as a result of overheating or using incorrect fuel.
In the event of a claim, please contact your dealer, who will deal with your claim.