Floor Nozzle - hanseatic VCB35B15C-1J7W-70 Gebrauchsanleitung

The appliance comes with various
nozzles designed for a range of
uses. Where required, before or
during vacuuming, each nozzle
can be attached to the tube han-
dle of the suction hose (15) or the
telescopic tube (16).

Floor nozzle

You will work with the floor noz-
zle (17) most of the time as it is
designed for large, flat surfaces.
The best vacuuming results are
achieved when you adapt the ap-
pliance to the floor surface using
the foot selector switch (21).
Appliance parts and accessories
•
(21)
•
(17)
operation.
Depending on the floor covering
and degree of dirtiness, you can
adjust the suction force using the
suction force control unit (2) (see
section "Setting the suction force"
on page EN-19).
Move the foot selector switch
to position
or smooth floors such as nee-
dle felt, PVC, parquet or tiles.
Move the foot selector switch
to position
carpets.
The foot selector switch can
also be readjusted during
Page EN-13
for short pile
for high pile