hanseatic VCB35B15C-1J7W-70 Gebrauchsanleitung Seite 66

Problem
Appliance
switches itself
off.
Suction force
is weak.
Troubleshooting table
Possible cause
Nozzle blocked.
Motor protection
filter (29)
is blocked.
Overheat
protection has
been activated.
Telescopic
tube(16) / suction
hose (15) is
blocked.
Dust bag is
not positioned
correctly.
Dust bag is full.
Nozzle is not
positioned
correctly.
Object is plugging
the nozzle.
Filters are
inserted
incorrectly or are
dirty.
Air by-pass
vent (24) is open.
Solutions, tips
Actuate On/Off foot switch, pull
out mains plug, clean nozzle.
Actuate On/Off foot switch, pull
out mains plug, leave appliance
to cool for at least 1/2 hour and
clean motor protection filter.
Actuate On/Off foot switch,
pull out mains plug, check
telescopic tube and suction
hose for blockage, and clean if
necessary.
Insert the dust bag correctly.
Change the dust bag.
Position the nozzle correctly.
Actuate On/Off foot switch,
pull out mains plug, check
telescopic tube and suction
hose for blockage. Remove
object.
Insert filters correctly and/or
clean.
Close the air by-pass vent.
Page EN-29