Environmental Protection; Accessories And Spare Parts; Scope Of Delivery; Device Description - Kärcher RCV 5 Bedienungsanleitung

used for autonomous, continuous maintenance
cleaning on all common floor coverings.
● This device has been developed for use in private
households and is not intended for the load imposed
by commercial use.

Environmental protection

The packing materials can be recycled. Do not
dispose of packaging as household rubbish but
place it in recycling.
Old devices contain valuable, recyclable materials that
should be recycled. Batteries and battery packs contain
substances which should not be released into the envi-
ronment. Therefore, please dispose of old devices, bat-
teries and battery packs using suitable collection
systems.
Adhere to the recommendations of the legislature re-
garding the handling of lithium ion batteries. Dispose of
used and defective battery packs in accordance with the
applicable regulations.
Notes on the content materials (REACH)
Current information on content materials can be found
at: www.kaercher.de/REACH

Accessories and spare parts

Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.

Device description

Illustration A
Reset switch
1
Top cover
2
Laser sensor (LiDAR)
3
On/Off button
4
"Return to charging station" button
5
Wiper cloth
6
Brush
7
Battery compartment
8
Wheel
9
Fall sensor
10
Collision sensor
11
Side brush
12
Ultrasound sensor
13
3D sensor with camera
14
Battery terminals
15
Wiper cloth holder
16
Brush cover
17
Dust container
18
water reservoir
19
Cleaning tool
20
Charging station
21
Mains plug
22

Functional description

The device consists of a charging station and a battery-
powered cleaning robot.
The mobile cleaning robot obtains its energy from a
built-in rechargeable battery. The cleaning robot can
clean for up to 120 minutes with a single battery charge.
It automatically returns to the charging station to re-
charge when the battery charge decreases.
The cleaning robot moves systematically. It scans the
room with a 3-D laser sensor with camera (LiDAR) and
then cleans the room step-by-step. It avoids obstacles
that are at least as high as the LiDAR tower.
Artificial intelligence helps the cleaning robot to avoid
complex obstacles such as cables or shoes without in-
terference.
Due to the calculation of the intelligent driving strategy
by the artificial intelligence and the subsequent obstacle
avoidance, it can take a few seconds, depending on the
obstacle situation, until the robot resumes its regular
travel path to clean the free area in straight paths.
The flat design of the cleaning robot allows it to clean
under furniture such as beds, sofas and cupboards.
The ultrasound sensor detects carpets and avoids them
during wet cleaning or combination cleaning. For dry
cleaning only, the unit increases its suction performance
on carpets (auto-boost).
Fall sensors that detect stairs and landings prevent falls.
Collision sensors detect obstacles and avoid them.
The battery for the cleaning robot is charged in the
charging station.
If the cleaning robot starts the cleaning work from the
charging station, it returns to the charging station when
the battery charge is insufficient.
As soon as the charging process is finished, the clean-
ing robot automatically leaves the charging station and
continues the cleaning work. The cleaning robot also re-
turns to the charging station when it has finished clean-
ing.
LED display
Lights up blue
Flashes blue slowly
Flashes blue fast
Flashes green slowly Cleaning robot charging
Lights up green
Flashes red slowly
Flashes red fast
The cleaning robot automatically switches to sleep
mode after 5 minutes of inactivity. Press any button to
wake it up.
English
Status displays
Status
Driving autonomously
Autonomous driving paused
WLAN connection mode
Cleaning robot fully charged or
successfully connected
Battery too empty to start
Error situation
Functions
Sleep mode
17