BTL5-H1_ _-M_ _ _ _-K-SR92/K_ _
Micropulse Linear Transducer - Rod Style
3
Installation (cont.)
3.2
Transducer, Installation
The smallest permissible distance
between magnet ring and rod
mounting surface is shown in
Fig. 3-1.
The sealing is carried cut with the
O-ring supplied at the flange fac-
ing.
3.3
Magnets, Installation
A magnet is required for each
transducer. This must be ordered
separately. ➥ ➥ ➥ ➥ ➥ Fig. 3-4.
For mounting the magnet we rec-
ommend to use non-magnetizable
material. ➥ ➥ ➥ ➥ ➥ Fig. 3-2.
Fig. 3-3: Thru-hole design for mounting BTL with O-ring
BTL-P-1013-4R
BTL-P-0814-GR-PAF
Fig. 3-4: Magnet (optional)
Bevel for O-Ring 15.4 × 2.1
BTL-P-1014-2R
english
thru-hole
BTL-P-1012-4R
5