Using The Choppergrinder Accessory To Process Food; Emptying The Choppergrinder Accessory; Cleaning And Servicing - Bosch VitaPower-Serie 4 Gebrauchsanleitung

en
Requirement: The appliance has stopped.
Turn the To-Go blender jug
1.
anticlockwise and remove it from the
main unit.
→ Fig.
20
Turn the To-Go blender jug and
2.
unscrew the To-Go blade insert.
→ Fig.
20
Insert the seal for the lid.
3.
→ Fig.
21
Close the mouthpiece on the lid.
4.
→ Fig.
21
Screw the lid and the To-Go blender
5.
jug in tightly.
→ Fig.
21
7.10 Using the choppergrinder
accessory to process food
Prepare the food. For example, cut
1.
large items of food into pieces.
Add the ingredients to the chopper-
2.
grinder attachment.
→ Fig.
22
Observe the maximum processing
quantities.
→ "Overview of recipes", Page 41
Place the chopper-grinder blade insert
3.
on the chopper-grinder attachment. →
Fig.
23
Screw the chopper-grinder blade insert
4.
and the chopper-grinder attachment in
tightly.
→ Fig.
24
– The
match up.
– You can only connect the chop-per-
grinder blade insert to the main unit
when the choppergrinder
attachment is fully screwed on.
42
and markings must
Turn the chopper-grinder accessory
5.
upside down.
→ Fig.
25
Place the chopper-grinder accessory
6.
onto the main unit and rotate in a
clockwise direction until it locks into
place.
→ Fig.
25
Set the rotary switch to the
7.
recommended speed.
→ Fig.
26
Tip: Processing can also take place
with instantaneous switching.
→ "Using instantaneous switching",
Page 37
Process the ingredients until you
8.
achieve the required result.
To end the operation, set the rotary
9.
switch to ⁠ .
→ Fig.
27
7.11 Emptying the choppergrinder
accessory
Requirement: The appliance has stopped.
Turn the chopper-grinder accessory
1.
anti-clockwise and remove it from the
main unit.
→ Fig.
28
Turn the chopper-grinder accessory
2.
over and unscrew the choppergrinder
blade insert.
→ Fig.
28

Cleaning and servicing

Empty the chopper-grinder attachment
3.
with the processed food.
8 Cleaning and servicing