Pushing Down Food For Processing; Adding More Ingredients; Emptying The Blender Jug; Processing Food Using The To-Go Blender Jug - Bosch VitaPower-Serie 4 Gebrauchsanleitung

7.5 Pushing down food for
processing
Remove the measuring jug and insert
1.
the pusher into the filling opening. →
Fig.
10
Push down the food from the sides of
2.
the blender jug.
→ Fig.
10
7.6 Adding more ingredients
During processing, remove the
1.
measuring jug and add the ingredients
through the opening in the lid.
→ Fig.
11
To add larger quantities, set the rotary
2.
switch to ⁠ .
Wait until the appliance stops.
3.
Remove the lid.
4.
→ Fig.
12
Add the ingredients.
5.
→ Fig.
12
Place the lid on the blender jug again
6.
and continue to process the
ingredients.
7.7 Emptying the blender jug
Requirement: The appliance has stopped.
Turn the blender jug anti-clockwise
1.
and remove it from the main unit.
→ Fig.
13
To pour out all of the processed food,
2.
remove the lid.
→ Fig.
14
7.8 Processing food using the To-
Go blender jug
Prepare the food. For example, cut
1.
large items of food into pieces.
operation
Add the food to the To-Go blender jug.
2.
→ Fig.
15
Observe the minimum and maximum
processing quantities. → "Overview
of recipes", Page 41
Place the To-Go blade insert on the To-
3.
Go blender jug.
→ Fig.
15
Screw the To-Go blade insert and the
4.
To-Go blender jug in tightly.
→ Fig.
16
– The
match up.
– You can only connect the To-
Goblade insert to the main unit
when the To-Go blender jug is
screwed on fully.
Turn the To-Go blender jug upside
5.
down.
→ Fig.
17
Place the To-Go blade insert on the
6.
main unit and rotate it in a clockwise
direction until it locks into place.
→ Fig.
17
Set the rotary switch to the
7.
recommended speed.
→ Fig.
18
Tip: We recommend pausing operation
several times when preparing smaller
quantities of baby food in the To-Go
blender jug. Processing can also take
place with instantaneous switching. →
"Using instantaneous switching", Page
37
Process the ingredients until you
8.
achieve the required result.
To end the operation, set the rotary
9.
switch to ⁠ . → Fig.
7.9 Closing the To-Go blender jug
and markings must
19
en
41