Using The Machine; Safety Checks - Stiga R72 Li 48 V1 Gebrauchsanweisung

"CRUISE CONTROL" button
To disengage the device and reset speed
control using the drive pedal (fig. 6.F) simply:
press the button fig. 7.G.
or
press the drive pedal (fig. 6.F).
Cutting means operating speed selector
button
ECO
NORMAL
TURBO
ECO icon
TURBO icon
• Bluetooth function
1. Download the App using the QR Code shown in fig. 21.
2. Follow the instructions.
The bluetooth connection is activated
automatically when the machine is started
and successful connection with the device
is confirmed when the icon in fig. 7.M is
illuminated.

5. USING THE MACHINE

5.1. PRELIMINARY OPERATIONS
• Battery check
Charge the batteries fully before using the machine for the
first time after purchase (chap. 6.1).
• Seat adjustment
See figure 10.
• Tyre pressure
1. Connect a compressed air gun with a pressure gauge to
the wheel valve (fig. 11).
2. Adjust the pressure according to the values indicated in
the "Technical Data" chart.
• Preparing the machine before starting work
1. Preparation for grass cutting and collection in the grass
catcher (fig. 9).
2. Preparation for grass cutting and rear grass discharge
on the ground (if equipped).
3. Preparation for grass mowing and mulching.

5.2. SAFETY CHECKS

• General safety checks
Object
Batteries.
Pushbutton panel controls
and commands.
Rear unload guard , grass
catcher.
Electrical cables.
Result
No damage to casing and
cover.
Good condition. No
damage.
Good condition. No
damage. Properly installed.
All insulation intact.
No mechanical damage.
Object
Operate the machine
forwards/reverse and
release the drive pedal.
Safety devices
• Safety devices checks
Status operator seated.
Drive pedal in neutral position (pedal
released).
Emergency button deactivated.
Action Fully insert the key.
Result the machine is ready to be turned ON.
Status Machine on or in operation.
Action Stand up from the driver's seat.
Result All services are deactivated. The icon in fig.
7.E icon flashes and the icon in fig. 7.P is
illuminated.
Status operator seated.
Drive pedal in forward or reverse position.
Action Attempt to start the machine.
Result The icons in fig. 7.E and fig. 7.O remain ON,
battery LEDs 1, 2, 4 and 5 flash.
Status Emergency button activated.
Action Attempt to start the machine.
Result The machine switches ON. The icon in fig. 7.E
flashes and the icon in fig. 7.O is illuminated.
Drive and cutting means do not work.
Status Cutting means engaged
Action Enable the reverse drive without holding down
the reverse mowing consent button.
Result The cutting means disengage.
Status Cutting means engaged
Action Enable the reverse drive without holding down
the reverse mowing consent button.
Result The cutting means disengage.
Status Cutting means engaged
Action Lift the grass catcher or remove the rear
discharge guard (for rear collection models
only).
Result The cutting means disengage.
EN - 5
Result
The machine slows down
and stops.
They operate as described
in the next paragraph.