Version With Cone Shaft - Baumer Hubner Berlin HMG 10 Profibus DP Montage- Und Betriebsanleitung

MOUNTING / MOUNTING TO DRIVE SHAFT
4.3.2

Version with cone shaft

)
Lifetime restrictions and angle error by radial deviations
High runout of the drive shaft can cause encoder angle error, see
page
High runout of the drive shaft can cause vibrations, which can shorten the lifeti-
me of the encoder.
» Lubricate drive shaft!
)
Minimize drive shaft runout (≤0.2 mm; ≤0.03 mm recommended).
i
The encoder must be mounted with cable connection facing downward and not
exposed to water.
9/29
12�
10b 10c 10a 5
10e
10d
10c 10b 10b
9 10c
1�6x8 mm
MB246EN - 11171695, 17A1, Baumer_HMG10-ProfibusDP_II_EN
17 mm
7a
11b 11a
Mt = 3-4 Nm
10 mm
section 4.5,
TX 20
2 3
5 mm