Electrical Connection; Profibus Dp; Features - Baumer Hubner Berlin HMG 10 Profibus DP Montage- Und Betriebsanleitung

ELECTRICAL CONNECTION / PROFIBUS DP
5.

ELECTRICAL CONNECTION

5.1

Profibus DP

i
Please find a detailed instruction for the Profibus DP interface and the device de-
scription file in the manual on the CD provided with the device.
5.1.1

Features

Bus protocol
Profibus-Features
Data Exch. functions
Preset value
Parameter functions
Diagnostic
Default settings
* Je nach Version
13/29
Profibus DP V0* or Profibus DP V2*
Profibus DP V0 = Device Class 1 and 2
Profibus DP V2 = Device Class 3 and 4
Input: Position value
Output: Preset value
The „Preset" parameter can be used to set the encoder
to a predefined value that corresponds to a specific axis
position of the system.
Rotating direction:
The relationship between the rotating direction and
rising or falling output code values can be set in the
operating parameter.
Scaling:
The parameter values set the number of steps per turn
and the overall resolution.
The encoder supports the following error messages:
- Position error
User address 00
MB246EN - 11171695, 17A1, Baumer_HMG10-ProfibusDP_II_EN