Load Shedding - Atlantic F617 Installation Und Betriebsanleitung

Your appliance's controls can be child-locked by pressing and holding these two buttons
the same time for more than 3 seconds.
Then when you press one of the buttons,
Perform the same operation to unlock. The following screen will be displayed
When activated, this function can detect temperature variations linked to the opening of your
windows.
If you forget to switch your appliance off when a window is open for a long period of time, this
function solves this issue, and prevents your appliance from heating unnecessarily.
If an open window is detected,
switches to Frost Protection mode (7 °C).
The appliance reacts to opening and closing of windows according
to several variables, including in particular:
the desired room temperature;
-
the outdoor temperature;
-
the installation configuration.
-
The function remains active for 2 hours. It is deactivated
automatically after this period.
The appliance will return to its original operation.
We advise against using this function in corridors and in rooms situated close to an entrance door
leading to the outside.
If your window is open and the outside temperature is below 7 °C, the appliance
continues to heat until 7 °C is reached.
Our appliances are compatible with various load shedding systems. However, you must not use
mains shut-off load shedding, since these systems are incompatible with our appliances. Sudden,
inadvertent and repeated power shut-offs can cause premature wear and damage to the
electronics boards, which would not be covered by the manufacturer's warranty.
During load shedding periods, the screen displays Of and FP.
The appliance will then return to its initial operation.
LOCKING ACCESS TO THE CONTROLS
(Lock command)
WINDOW OPEN DETECTION
is displayed and flashes, and the appliance automatically

Load shedding

will be displayed. The controls will be locked.
30
.
(Unlock command)
Window