Assembly And Installation; Charging The Battery; Switching The Cordless Magnetic Lamps On/Off/Setting Timer Function; Cleaning And Storage - LIVARNO LUX 970-K Bedienungs- Und Sicherheitshinweise

a safe place out of the reach of children�
There is a risk of suffocation if children are
allowed to play with packaging material�
z Assembly and installation
Please note: Dispose of all packaging
material�
Take the magnetic holder with the adhesive
pad and pull off the protective strip (see
8
Fig� D)� Now stick the magnetic holder in the
desired position� To ensure good adhesion,
make sure the surface is flat, dry and free of
grease� Fix the cordless magnetic lamp
the magnetic holder
integrated magnet
7
C)�
Please note: Removing the adhesive pad
may cause damage to the surface in some
cases� We can accept no liability for such
damage� When the battery needs to be
recharged, the magnetic lamp can simply be
removed from the magnetic holder
Fig� C)�
The holes on the back have no function�
z Charging the battery
Risk of electric shock!
The cordless magnetic lamps
be recharged in dry indoor areas using an
SELV mains adaptor� Before using the
cordless magnetic lamp
please fully charge the battery� To do so, use
only the USB charging cable supplied
Plug the USB charging cable supplied
„
into the micro-USB socket
cordless magnetic lamp (see Fig� F)�
To charge the lamp, connect the USB
„
charging cable
9
(5 VDC, max� 0�34 A)�
Plug the USB mains adaptor into a power
„
outlet socket�
The charging time is approx� 2-3 hours� The
charge indicator
5
cordless magnetic lamp is fully charged� As
1
with the aid of the
8
in the casing (see Fig�
(see
8
should only
1
for the first time,
1
9
9
on the
6
to a USB mains adaptor
remains red until the
soon as the cordless magnetic lamp
fully charged, the charge indicator
green� You can then unplug the USB mains
adaptor from the power outlet socket and
disconnect the USB charging cable
the cordless magnetic lamp
z Switching the cordless
magnetic lamps ON/OFF/
Setting timer function
The cordless magnetic lamps have three
functions: Permanently on, 3-minute timer
to and 15-minute timer� For the permanently on
function, set the OFF/15M/3M/ON switch
to the ON position and press the ON/
4
OFF switch
2
function, set the OFF/15M/3M/ON switch
to the position 3M and press the ON/
4
OFF switch
2
will then switch off automatically after 3
minutes� For the 15-minute timer function, set
the OFF/15M/3M/ON switch
position 15M and press the ON/OFF switch
� The cordless magnetic lamps will then
2
switch off automatically after 15 minutes� To
completely switch off the cordless magnetic
lamps, set the OFF/15M/3M/ON switch
to the OFF position�
4
z Cleaning and storage
Risk of electric shock!
There is a risk of electric shock from parts
� that carry electric current� Unplug the USB
mains adapter from the power outlet socket
before attempting to clean the lamp�
Risk of damage!
Cleaning the cordless magnetic lamps and
accessories incorrectly could damage them�
Before cleaning the cordless magnetic
„
lamp, always switch it off and remove the
USB charging cable�
Do not use corrosive cleaning agents,
„
brushes with metal or nylon bristles or not
sharp or metallic cleaning implements such
�
1
� For the 3-minute timer
� The cordless magnetic lamps
4
GB/MT
is
1
shows
5
from
9
to the
27