Before First-Time Use; Assembly And Installation; Charging The Battery; Lamps On/Off - LIVARNO LUX 970-M Bedienungs- Und Sicherheitshinweise

incorrectly, there is a risk of explosion or of
skin burns from escaping battery fluid.
Never throw rechargeable batteries on a
„
fire. They may explode or cause toxic
fumes.
Do not expose rechargeable batteries to
„
unlimited amounts of sunlight or heat.
Do not take rechargeable batteries apart or
„
short-circuit them.
Charge the battery at normal room
„
temperature (approx. 20 °C).
Use only an SELV mains adaptor for
„
charging.
z Before first-time use
Check that all package contents are present.
Inspect the cordless magnetic lamps
the USB charging cable
external damage. If you find any signs of
damage, do not use the cordless magnetic
lamps. Please contact Customer Service at
the address indicated.
Unpack all parts of the product. Remove the
packaging material. Keep the packaging in
a safe place out of the reach of children.
There is a risk of suffocation if children are
allowed to play with packaging material.
z Assembly and installation
Please note: Dispose of all packaging
material�
Take the magnetic holder with the adhesive
pad and pull off the protective strip (see
8
Fig. C). Now stick the magnetic holder in the
desired position. To ensure good adhesion,
make sure the surface is flat, dry and free of
grease. Fix the cordless magnetic
the magnetic holder
integrated magnet
4
E).
Please note: Removing the adhesive pad
may cause damage to the surface in some
cases. We can accept no liability for such
damage. When the battery needs to be
and
1
for any signs of
9
lamp to
1
with the aid of the
8
in the casing (see Fig.
recharged, the magnetic lamp can simply be
removed from the magnetic holder
Fig. E).
z Charging the battery
Risk of electric shock!
The cordless magnetic lamps
be recharged in dry indoor areas using an
SELV mains adaptor. Before using the
cordless magnetic lamps
please fully charge the battery. To do so, use
the USB charging cable supplied
Fig. D).
Plug the USB charging cable supplied
„
into the micro-USB socket
magnetic lamp (see Fig. F).
To charge the lamp, connect the USB
„
charging cable
9
(5 VDC, max. 0.22 A).
Plug the USB mains adaptor into a power
„
outlet socket.
The charging time is approx. 2-3 hours. The
charge indicator
6
cordless magnetic lamp is fully charged. As
soon as the cordless magnetic lamp
fully charged, the charge indicator [6] shows
green. You can then unplug the USB mains
adaptor from the power outlet socket and
disconnect the USB charging cable
the cordless magnetic lamp
z Switching the cordless
magnetic lamps ON/OFF
The cordless magnetic lamps can be
„
switched on or off using the ON/OFF/
AUTO switch �
3
The cordless magnetic lamps have two
„
functions: permanently on, and
automatically on for 120 seconds. For the
permanently on function, slide the ON/
OFF/AUTO switch
lamp to the ON position. For the light to
come on automatically when the cupboard
door is opened, slide the ON/OFF/AUTO
(see
8
should only
1
for the first time,
1
(see
9
9
on the
5
to a USB mains adaptor
remains red until the
is
1
from
9
(see Fig. F).
1
on the side of the
3
GB/IE/NI/CY/MT
41