Setup Menu; Setup Menu: Clinical Settings (Mask Type); Setup Menu: Alarm Settings (Alarm Volume); Setup Menu: Options - ResMed Stellar 100 Gebrauchsanweisung

Setup menu

Setup menu: Clinical Settings (Mask Type)

1
Press
2
Use the push dial
Settings screen.
Mask type options: Nasal, Ultra, Pillow, Full Face, Trach, Pediatric.
Note: When Mask Type is set to Trach or Full Face the Non-Vented Mask alarm
automatically turns on.
For a full list of compatible masks for this device, see the Mask/Device Compatibility List
on www.resmed.com on the Products page under Service & Support. If you do not have
internet access, please contact your ResMed representative.

Setup menu: Alarm Settings (Alarm Volume)

1
Press
2
Use the push dial
medium or high.

Setup menu: Options

1
Press
2
Use the push dial
in the table below).
16
to display the Clinical Settings screen.
to scroll through the menu and change the Mask Type in the Advanced
to display the Alarm Settings screen.
to scroll through the menu and change the Alarm Volume to low,
to display the Options screen.
to scroll through the menu and change parameters (see descriptions