Child Lock - Teka TZC32320 Montageanleitung Und Empfehlungen Zur Verendung Und Wartung

EN
touch key (1). In standby mode an
H will appear in the zones that are hot.
The rest of the displays will not light up.
If your cooker has this option, the
double burner hot plate offers the
possibility of using the inside ring or
also, in addition, the outside one,
depending on the size of the pot or
pan.
HOT PLATE
The related hot plate must be
selected.
Select the desired power (from 1
to 9) using the touch key
(4/5).
3 Press the double hot plate touch
key (6) to activate the double
burner. When the double zone will
be activated, double zone indicator
(8) light on.
HOT PLATE
The key, by which its double burner
hot plate was switced on previously
is selected.
Press the double hot plate touch
key (6) to deactivate the double
burner. The double burner indicator
be deactivated
of the cooking hob
To prevent undesired manipulation
you can lock the entire unit, except
for the on/off touch key, using the
locking touch key (7). This function
is useful for child safety. When the lock
is activated, the lock indicator light (9)
comes on.
However, remember when the touch
36
the lock is activated (the lock indicator
light (9) on).
On the other hand, if the touch control
(1) to be used.
To deactivate the locking function,
press the locking touch key
and touch control will be ready for use.

CHILD LOCK

complicated than key lock. User can
activate key lock via one sensor. But
child lock need a sensor sequence.
The Child Lock is being used to
prevent children from turning on
the hob.
or
The hob is switched on via
Any zone should not be selected.
When any zone is not selected,
(5) Increase power touch key and
(4) decrease power touch key
and minus sensors is hold for 3
seconds at same time. At the end
of this period, a short buzzer sound
is heard
After buzzer signal , the
locking touch key is touched (there
is no need to keep press for a long
time) and a long buzzer sound is
heard and the Child Lock will be
activated and all power display
shows "L".
During Child Lock, if user touch any
sensor (Main sensor included) , "L"
Child lock status is not
being stored. If the energy of the hob
is butted, child lock status could not
be preserved.
To be able to deactivate Child Lock,
the Child Lock should be activated
before and all power display show "L"
(5) Increase power touch key
and (4) decrease power touch
key and minus sensors is hold for
3 seconds at same time. At the end
of the this period, a short buzzer
sound is heard,
After buzzer signal , is touched to
the (7) locking touch key (there
is no need to keep press for a long
(7)
time) and a long buzzer sound is
heard and the Child Lock will be
de activated and "Indication will
This function facilitates cooking as
you do not need to be present while
it is being done. The touch control
pre-programmes the chosen hot
plate at the maximum power and
subsequently lowers it to the desired
power level (which you have selected)
(1)
after an approximate amount of time
(see table 1).
Table 1
Automatic Cook Start
Selected
power
0
1
2
3
4
(7)
5
6
7
8
9
COOK START FUNCTION ON
The hot plate must be selected.
Select power 9 and then press
power touch key
the touch key you must lower the
continuous cooking power to the
desired level, (for example 6).
When the automatic cook function
desired power level on the display.
Function
0
60
180
288
390
510
150
210
270
-
(5).After using