Instructions For The Installer - Pkm KF4-2KB G Bedienungsanleitung

I
NSTRUCTIONS FOR THE INSTALLER
1. The appliance is equipped with a Schuko safety plug. Only use a Schuko safety
plug and a properly-grounded safety socket for connecting the appliance to the
mains.
2. Your household power supply must meet the power consumption of the
appliance.
3. The voltage must meet the values on the nameplate.
4. The power cord must withstand the values on the nameplate.
5. When connecting do not use adapters, reducers and branching devices as they
cause overheating. RISK OF FIRE!
6. The power cord must not touch hot areas and its temperature must not exceed
75 0 C.
7. When the socket is not accessible for the user or a fixed electrical connection
of the appliance is required, an all-pole disconnecting device must be
incorporated during installation. Disconnecting devices are switches with a
contact opening distance of at least 3 mm. These include LS-switches, fuses and
protectors (EN 30335). Read the information on the nameplate and the
connection diagram before connecting the appliance to the mains. The electricity
supply must be performed via a 16A automatic cut-out. If in doubt, always
contact the local building authorities and consult the relevant legal provisions.
8. Do not bend or compress the power cord.
9. Check the power cord regularly. The power cord must be replaced by a qualified
professional only!
(
QUALIFIED PROFESSIONAL
50
):