Electrical Connection; Instructions For The Installer - Pkm BIC8 GK-2KB Bedienungsanleitung

2.5 Electrical connection

DANGER!
household power supply) before you connect the appliance to the
mains. RISK OF ELECTRIC SHOCK!
DANGER! The appliance must be connected to the mains by a
qualified professional, who is familiar with and adheres to the local
requirements and supplementary regulations of your energy supplier.
DANGER! The technical data of your energy supplier must meet the
data on the rating plate of the appliance.
I
NSTRUCTIONS FOR THE INSTALLER
❖ The appliance is manufactured to work with three-phase alternating current (380 -
415 V 3N ~ 50 Hz). Remember that the connection wire should match the
connection type and the power rating of the cooker. The connection cable must
be secured in a strain-relief clamp. The ground wire must be connected to the
marked clamp of the terminal. The electric supply of the appliance must be
equipped with an emergency switch with a distance between the contacts of at
least 3 mm which disconnects the entire appliance from the mains in a case of
emergency. Read the information on the rating plate and the connection
diagram before connecting the appliance to the mains.
❖ When the socket is not accessible for the user or a fixed electrical connection
of the appliance is required, an all-pole disconnecting device must be
incorporated during installation. Disconnecting devices are switches with a
contact opening distance of at least 3 mm. These include LS-switches, fuses and
protectors (EN 30335).
❖ When installing the appliance, contact protection must be ensured.
➢ H
OW TO OPEN THE CONNECTION BOX
downwards (2) to open the box (s. fig. below). You may need to release two locks
on both sides of the connection box.
Switch off the power supply (fuse box of your
(
QUALIFIED PROFESSIONAL
: move a screwdriver (1) slightly
~ ~
89
)