Instructions For The Installer - Pkm IN4-S Bedienungsanleitung

I
NSTRUCTIONS FOR THE INSTALLER
❖ Appliances with three-pole cable are set up for operation with alternating current
at the voltage and frequency indicated on the rating plate. The voltage of the
heating elements is 230 V. Remember that the connection wire should match the
connection type and the power rating of the cooker. The connection cable must
be secured in a strain-relief clamp. The ground wire must be connected to the
marked clamp of the terminal. The electric supply of the appliance must be
equipped with an emergency switch with a distance between the contacts of at
least 3 mm which disconnects the entire appliance from the mains in a case of
emergency. Read the information on the rating plate and the connection
diagram before connecting the appliance to the mains.
❖ When the socket is not accessible for the user or a fixed electrical connection
of the appliance is required, an all-pole disconnecting device must be
incorporated during installation. Disconnecting devices are switches with a
contact opening distance of at least 3 mm. These include LS-switches, fuses and
protectors (EN 30335).
❖ When installing the appliance, contact protection must be ensured.
➢ Your domestic circuit must be equipped with an automatic circuit breaker.
➢ The appliance must be grounded.
➢ Check that the technical data of your energy supply meet the values on the
nameplate.
➢ The power cord must not touch hot areas and its temperature must not exceed
75 °C.
➢ Do not bend or compress the power cord.
➢ Check the power cord regularly. The power cord must be replaced by a qualified
professional only!
WARNING! Any damage caused by an appliance that is not connected
to the mains properly is not subject to the guarantee!
(
QUALIFIED PROFESSIONAL
~ ~
75
)