Beurer SR-BM788 Gebrauchsanweisung Seite 26

6.2 Setting the hour format, date, time and Bluetooth
It is essential that you set the date and time. Otherwise, you will
not be able to save your measured values correctly with a date
and time and access them again later.
There are two different ways to access the menu from which
you can adjust the settings:
• Before initial use and after each time you replace the battery:
When inserting batteries into the device, you will be taken to
the relevant menu automatically.
• If the batteries have already been inserted:
With the device switched off, press and hold the START/
STOP button for approx. 5 seconds.
In this menu you can adjust the following settings in succession:
Hour format Date
➔
The hour format flashes on the display.
• Select the desired hour format using the M1/
M2 memory buttons and confirm with the
START/STOP button
If you press and hold the M1 or M2 me-
mory button, you can set the values more
quickly.
®
Time ➔ Bluetooth
➔
.
The year flashes on the display.
• Select the year using the M1/M2 memory
buttons and confirm with the START/STOP
button .
The month flashes on the display.
• Select the month using the M1/M2 memory
buttons and confirm with the START/STOP
button .
The day flashes on the display.
• Select the current day using the M1/M2 me-
mory buttons and confirm with the START/
STOP button
If you have set the 12h hour format, the month is dis-
played before the day.
The hours flash on the display.
• Select the current hours using the M1/
M2 memory buttons and confirm with the
®
START/STOP button
The minutes flash on the display.
• Select the current minutes using the M1/
M2 memory buttons and confirm with the
START/STOP button
26
.
.
.