EC Declaration of Incorporation
as defined by the EC Machinery Directive 2006/42/EC, Annex II B
The design of the partly completed machine:
Axial fan DN.., FA.., FB.., FC.., FE.., FF.., FG.., FH.., FL.., FN.., FS.., FT.., FV.., VN.., VR.., ZC.., ZF.., ZG.., ZN..
•
•
Centrifugal fan ER.., GR.., HR.., RA.., RD.., RE.., RF.., RG.., RH.., RK.., RM.., RR.., RZ.., WR..
Cross-flow fan QD.., QG.., QK.., QR.., QT..,
•
Motor type:
Induction internal or external rotor motor (also with integrated frequency inverter)
•
•
Electronically commutated internal or external rotor motor (also with integrated EC controller)
Complies with the requirements in Appendix I, Articles 1.1.2, 1.1.5, 1.4.1, 1.5.1 in EC Machinery Directive
2006/42/EC.
Manufacturer
ZIEHL-ABEGG SE
Heinz Ziehl Straße
74653 Künzelsau, Germany
The following harmonized standards have been applied:
EN 60204-1:2018
EN ISO 12100:2010
EN ISO 13857:2008
Note:
The special technical documents in accordance with Appendix VII B have been created and are available in full.
The following persons are authorized to compile the technical documents, address see above.
Upon reasonable request, the special documents shall be transmitted to the public authority. The transfer can be
made electronically, on data carriers or on paper. All property rights remain with the aforementioned manufacturer.
Start-up of this incomplete machine is prohibited until it is ensured that the machine in which it has been
installed complies with the provisions of the EC Machinery Directive.
Künzelsau, 05.10.2021
(location, date of issue)
ZIEHL-ABEGG SE
Tobias Gauss
Deputy Head of Technics Ventilation Technology
(name, function)
(signature)
Safety of machinery – Electrical equipment of machines – Part 1:
General requirements
Safety of machinery – General principles for design – Risk assess-
ment and risk reduction
Safety of machinery – Safety distances to prevent hazard zones
being reached by upper and lower limbs
Compliance with EN ISO 13857:2008 relates only to the installed
contact protection if it is part of the scope of delivery.
ZIEHL-ABEGG SE
Moritz Krämer
Head of Electrical Systems
(name, function)
(signature)
- Translation -
(english)
ZA87-GB 2021/40 Index 011