Before Use; Operation; Warming Function; Switch Off The Product - Silvercrest SSMN 2 C4 Bedienungs- Und Sicherheitshinweise

Do not use the product on swol-
len, burnt, inflamed, diseased or
injured regions of the skin and
body areas. If in doubt, obtain
medical advice before using the
product.
Never use the product if you
have injuries or pain in the neck,
shoulders, back, abdomen, thighs
or lower legs.
No action is needed from users
to shift the product between 50 Hz
and 60 Hz. The product adapts
itself for both 50 Hz and 60 Hz.

Before use

Note: Remove all packaging material from the
product.
Connect the connection plug at the wire of the
mains power adaptor to the socket
inner side of the hand loops
Place the massager around your neck, shoulders,
back, abdomen, thighs or lower legs. Align the
massage heads
2
shoulders, back, abdomen, thighs or lower legs
use the hand loops
buttons must be on the left.
Plug the mains power adaptor to the mains
power socket.
Ensure the massager heads
neck, shoulders, back, abdomen, thighs or
lower legs.

Operation

To switch on the massager, press the power
button to start rotation of massage heads
6
in low speed.
at the
3
.
8
on the side of your neck,
to adjust it. The control
8
aligned to your
2
To change the rotation speed of the massage
heads , use the massage button
2
gle between low speed rotation / high speed
rotation / pause. To stop the massage function,
press the power button
Note: Never use the product for more than
15 minutes. A longer massage may lead to
tension caused by overstimulation of the muscles.
Note: If you found yourself painful or uncom-
fortable, stop the massage immediately.

Warming function

To complement the massage with the warming
function, press the light and heat functions
button to turn on the heat function. The red
5
heat function indicator
the massage heads

Switch off the product

To switch off the product, press the power
button , the heat function indicator
6
the light of the message heads
the massage heads
product switches off automatically after 15
minutes.
To turn off the product completely, disconnect
the mains power adaptor from the power supply.

Cleaning and care

LIFE BY ELECTRIC SHOCK!
Disconnect the mains power adaptor
from the mains socket and unplug connection
plug from the socket
or mains power adaptor into water.
Ensure the product is completely dry before
connecting the mains power adaptor.
Do not use abrasive, aggressive or chemical
cleaning agents to clean the product. It could
2
damage the product.
to tog-
7
.
6
and the red light of
4
switch on.
2
and
4
will go off,
2
stop rotating. The
2
DANGER TO
before cleaning.
3
Never immerse the product,
GB 9