Before Use; Operation - Silvercrest SSNR 12 B2 Bedienungs- Und Sicherheitshinweise

Only use the provided mains
power adaptor
in Technical Data section.
Make sure that the details on the
rating label are in conformity
with your mains voltage.
In the event of malfunctions, re-
move the mains power adaptor
from the mains socket.
9
Do not open the product or at-
tempt to repair it yourself. De-
fective products should only be
repaired by qualified personal.
Always remove the mains power
adaptor from the mains socket
9
after each use and before clean
the product.
Keep the power cord away
from hot surfaces, sharp edges
and mechanical forces.
Never let the power cord becomes
a trip hazard, that no-one can
get tangled in it or tread on it.
Allow the product to cool down
before moving it to a different
location.
WARNING!
HAZARD OF FIRE!
Do not operate the product
close to or below curtains, wall
cupboards or other inflammable
materials.
Do not use the product on
swollen, burnt, inflamed, diseased
as described
9
or injured regions of the skin and
body areas. If in doubt, obtain
medical advice before using
the product.
Never use the product if you
have injuries or pain in the
neck/back or spine.
No action is needed from users
to shift the product between 50 Hz
and 60 Hz. The product adapts
itself for both 50 Hz and 60 Hz.

Before use

Note: Remove all packaging material from the
product.
Always keep the cover
cushion before use. Only the cover
1
intended to be washed according to "Clean-
ing and care" section.
Place the massage cushion
and fasten it to the back of the high chair with
the Velcro strap
12
Connect connection plug
at the back of the massage cushion
Plug the mains power adaptor
power socket.
Sit on the chair and ensure the massage
cushion is in the desired position.
1

Operation

Switch on the massage cushion
the power button
5
the blue light indicator switches on.
Press the outward rotation button
rotation of massage heads
indicator switches on above the button.
on the massage
11
11
on a high chair
1
.
to the socket
10
.
1
to the mains
9
by pressing
1
on the control handset
to start
6
. The blue light
2
is
4
,
3
GB GB 9 9