Function; Before First Use - Silvercrest SVM 3.7 A1 Bedienungsanleitung Und Sicherheitshinweise

Function

Vacuum massage stimulates the tissue by the formation of negative pressure . The
layers of skin are not pressed together as in conventional kneading massage, but
instead pulled apart by the vacuum in the attachment .
In this way, deeper tissue layers can also be reached, while the blood and lymph
circulation can be stimulated effectively . This helps to improve the nutrient supply
to the skin as well as to detoxify the tissue .

Before first use

♦ Clean the appliance as described in the section Cleaning .
♦ Charge the appliance fully before using it for the first time:
–
Connect the mains adapter 7 to the connection 5 of the appliance
and plug the mains adapter 7 into a mains power socket .
The control lamp 4 lights up red during charging .
–
Allow the appliance to charge for four hours and then disconnect it from
the power supply if you do not wish to use it .
The appliance is now ready for use . Before starting, always read the Use section
to learn how to handle the appliance safely and avoid injuries .
NOTES
► The control lamp 4 goes out as soon as the appliance is fully charged .
However, you should leave the appliance connected to the power supply
for the recommended time before the first use .
► If the battery is discharged, the control lamp 4 will flash red . The ap-
pliance switches off after about 15 seconds . Plug the appliance into the
power supply and recharge it .
► You can also use the appliance while it is charging . However, do not use it
during the first charging process .
SVM 3.7 A1 GB │ IE │ 23 ■