Explanation Of Symbols; Operating Instructions; Overview - Eufab 16257 Bedienungsanleitung

and spare parts that are stated in these
instructions or that are recommended by
the manufacturer!
• Do not misuse the cable. Do not use a
cable or accessories other than those
supplied.
• To disconnect the power supply, always
pull on the plug itself, never on the cable.
• Do not expose the camera to mechanical
loads, extreme temperatures, damp,
solvents or gases.
• Secure the camera in your vehicle in such
a way that your driving is not impeded.
• The camera may not be mounted in the
vicinity of air bags.
• The battery of the camera cannot be
removed and may only be charged when
in the camera. Only use the supplied
charging cable to charge the battery,
never use another external charger.
• Observe the additional safety precau-
tions in the individual sections of the

operating instructions

• The use as vehicle monitoring
camera may be restricted or
banned in some countries. Find out
about the legal regulations before
using the camera.

5. EXPLANATION OF SYMBOLS

Complies with EC directives
Labelled electrical products may not be
disposed of in the household waste
Labelling according to § 17 BattG (German
battery laws):
The end consumer is obliged by law to send
batteries to the dealer for proper disposal
or to hand them into an appropriate
collection point.
Read the operating instructions
10
6. OPERATING INSTRUCTIONS

6.1 OVERVIEW

1 ON/OFF switch
2 Slot for memory card
3 Menu button
4 Lens
5 Power-LED
6 Mounting point
7 USB socket
8 AV output
9 Display
10 OK-button
11 Cursor button, down
12 Parking mode button
13 Cursor button, up
14 Mode button
1
2
3
7
8
10
Figure 1: Camera
15 Suction base
16 Lever
17 Coupling nut / ball joint
18 Camera mount
15
Figure 2: Suction base mount
6
4
11 12 13
16
17
18
5
9
14