Cleaning; Reassembling - STORZ & BICKEL Crafty+ Gebrauchsanweisung

7.1.3 Cleaning

liRCzoP
z8L•EL•(y gy5L.Ly &8 ½ g ääg4yB
and may easily ignite.
Caution! Hot surface!
• aLyyL® K.B 8g0BK( &U8KE!5K&LU8
L0 K.B &8L•EL•(y gy5L.Ly ägU!
0g5K!EBE
The Cleaning Brush, cotton swabs
i
and paper or cotton cloths are
suitable for manual cleaning. We
recommend warm rinsing water or
isopropyl alcohol as solvents.
á Place all parts of the Cooling Unit
(except the Cap Lock) and the Fill-
ing Chamber Screen in isopropyl
alcohol for a maximum of 1/2 hour.
Prolonged contact with isopropyl
i
alcohol can lead to color chang-
es or embrittlement of the plastic
parts.
á Allow all parts to dry thoroughly.
7 C L E A N I N G
á Check all parts for damaged sur-
faces, cracking, softening, harden-
ing, soiling or discoloration.
á Remove any damaged parts.
á If necessary, clean the cap lock
with warm rinse water or wipe it
with isopropyl alcohol.
PoCzlh
Material damage caused by
&ä•EL•BE 5yBgU&UD
Stickers with the signet hologram
may fade and their adhesive may
dissolve
• ißL&6•ELyLUDB6 5LUKg5K ®&K.
&8L•EL•(y gy5L.Ly
Do not put the optional accessories
i
including the Herb Mill, Filling Aid
and Magazine in isopropyl alcohol.
Clean these parts in the dishwasher,
or with warm rinsing water.

7.1.4 Reassembling

á Assemble the parts in reverse order.
When assembling, make sure that
i
Seal Rings are properly seated. The
small Base Seal Ring, especially,
must sit completely in the Cooling
Unit Cap and be no longer visible.
á Carefully insert the upper Acreen
into the groove provided.
56