STORZ & BICKEL Crafty+ Gebrauchsanweisung Seite 55

X When cleaning the Cooling Unit
Cap in isopropyl alcohol, remove
the Cap Lock by pulling it up on one
side.
The signet hologram on the cap
i
lock is a sticker.
á Unscrew the Cooling Unit Base
from the Vaporizer by turning it 90°
counterclockwise.
7 C L E A N I N G
á Lever out the large Base Seal Ring
with the Filling Chamber Tool at the
recess in the groove.
á Remove the small Base Seal Ring.
á Press the upper Screen with the
Filling Chamber Tool from the top
to the bottom out of the Cooling
Unit base.
55